KLAUDIA 5.0

Traditional Line
Pellet

Ventilated pellet stove

3.2-8.0 kW
Nominal thermal power

230 m³
m³ heatable

Traditional Line
Pellet

Ventilated pellet stove

Klaudia 5.0 combines aesthetics and practicality, with a clean design and an output of 8 kW-N to heat up to 230 m³. Three ventilation speeds that can be set according to your needs for maximum thermal and acoustic comfort. Also available in a ducted version (Plus).

The warmth of pellets combined with a design that furnishes

Characteristics

Product advantages

Cast iron door, hearth and brazier
Radiant surface heat exchanger
Airtight tank
Removable ash compartment
Front room on/off ventilation with dedicated motor
Ventilation with PRO AIR SETUP
FPC Plus function
Ceramic glow plug
Smoke discharge outlet option: rear, upper
The hearth can be removed by authorised service personnel

Glass cleaning system
A system of pre-heated air which removes any deposit from the fire-door glass.
Removable brazier for easy cleaning
The burn pot’s system of construction allows easy extraction for quick and complete cleaning.
Auto-adjustment of the fumes extractor (encoder)
It keeps the RPM of the fumes motor constant, to ensure correct combustion of the product.
Hopper safety thermostat
Ensure always high safety standard, preventing the overheting of the product in case of anomaly.
1st and 2nd air auto-balancing
Primary and secondary air electronically balanced for an optimal combustion and thermal efficency.
Outdoor temperature thermostat input
The product interfaces with room temperature control devices (thermostat or contacts) to achieve the selected temperature in every room.
Air-tight seal test at 50 Pa (100% of the products)
All the air-tight products, or even those that have some “air-tight” components (like the hopper), are tested under high pressure at the end of the production line to ensure their safety and optimal performance.
Flue pipe safety pressure switch
Checks the correct evacuation of the fumes and, in case of need, locks the loading of pellets, to avoid problems on the generator.
Chrono-thermostat
Chronothermostat provided with temperature control divided in four daily slots for an optimal rooms management.
Auto-relighting after black-out
Following a black out the appliance automatically re-starts after having carried out the scheduled auto-control.
Room temp. thermostat
The room probe optimizes comfort and lowers noticeably the consumption.
Clean combustion
Increases the combustion efficency and the duration of parts subject to wear duration reducing at the same time the ordinary brazier cleaning.
Doors in cast iron
The high-quality cast-iron doors are made to last and ensure perfect sealing at all times.

KLAUDIA 5.0

Finishes

The timeless elegance that captures every gaze

Technical data

Technical specifications

Dimensions (WxHxD)498x1017x575 mm
Hourly consumptionmin. 0.7 - max. 1.8 kg/h
Total tank capacity~ 15 kg
Fumes outlet diameter (Ø)80 mm
Efficiencymin. 92.4 - max. 91.1 %
Net Weight101 kg
Energy ClassA+
Nominal thermal powermin. 3.2 - max. 8 kW
Heatable m³230 m³

Download the support material

Declaration of Performance

pdf361 kB

Energy labelling - Labelling

Declaration of conformity

pdf282 kB

Energy labelling - product sheet

pdf737 kB

Ecodesign

pdf281 kB

Certifications

CE
The CE marking indicates conformity with EU standards, enabling the free marketing of marked products within the European market.
Ecodesign
European certification defining the ecodesign guidelines for biomass products.
Conto Termico 2.0
Only for Italy: the Ministerial Decree 28/12/12, better known as “Conto Termino”, allows a specific incentive in case of replacement of old appliances by new ones with certain characteristics
Flamme Verte
French trademark of the ADEME agency for the environmement and the energy. The products “Flamme Verte” approved guarantee the best high energy performances and respect for the environment.
BlmSchV
German regulations on controlling emissions.
MFB
Only for Germany: The products is ready to be connected to a multiply chimney connection , just when the installation is made in accordance with requirements of the regional and national standards, and when observed the norms DIN EN 13384-2, DIN V 1816-1, DIN 18896 and MFeuV-2007 (Muster- Feuerungsverordnung), and that the district chimney sweeper has checked and approved the correct installation.